Supported Frequencies - 110Mhz 600Mhz 800Mhz sysinit: ping: www.netgear.com: Unknown host Original firmware looks like to have OpenWrt origin: [wifi1] FWLOG: [172029] WAL channel change freq=2422, mode=1 flags=0 rx_ok=1 tx_ok=1 [ 1.386041] 0x000001200000-0x000001340000 : "art" clbr: module license 'Proprietary' taints kernel. dni_enet 1318 0 Add VHT80_80 channels: 5290 : 5610 no pmic restart interrupt specified chunk 4 len 254880 requested ,ptr 0x59240000 kc 227 : init_DebugD end ebtable_nat 1061 0 sysinit: ping: www.netgear.com: Unknown host sysinit: deleting routers sysinit: ping: www.netgear.com: Unknown host Add VHT80_80 channels: 5530 : 5690 Shop with confidence. OL_ACBKMinfree : 0 [ 1.308766] console [ttyMSM0] enabled drwxr-xr-x 2 root root 927 Dec 10 2018 bin Switching to clocksource gp_timer That change was made for master and 18.06 branches in June 2018. 1434 root SW< [bond0] sysinit: operate done. [wifi1] FWLOG: [172447] WAL channel change freq=2427, mode=1 flags=0 rx_ok=1 tx_ok=1 4016 root 820 S /usr/sbin/dnsmasq --except-interface=lo -u root -r /t ol_ath_alloc_host_mem_chunk req_id 5 idx 8 num_units 132 unit_len 1876, 4 -rw-r--r-- 1 root root 1270 Oct 17 06:59 icm.conf Add VHT80_80 channels: 5530 : 5210 :init completed for Pipe Pair[3] ol_ath_vap_set_param: Now supported MGMT RATE is 6000(kbps) and rate code: 0x3 sysinit: Retype password: --------------------------------------------------------------- [ 0.554470] msm_serial 16340000.serial: msm_serial: detected port #0 sit0 no wireless extensions. In: serial clbr 19626 1 umac PID Uid VmSize Stat Command ol_regdmn_init_channels: !avail mode 0x680c (0x10000) flags 0x40100 629 root SW [mtdblock10] sysinit: ping: sendto: Network is unreachable [ 0.000431] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) mtdids : nand0=msm_nand [wifi0] FWLOG: [180412] WAL channel change freq=5765, mode=10 flags=0 rx_ok=1 tx_ok=1 1 registered CLOCK PLL skipped Find setup help, user guides, product information, firmware, and troubleshooting for your Nighthawk X4S R7800 on our official NETGEAR Support site today. [wifi1] FWLOG: [483042] WAL_DBGID_DEV_RX_TIMEOUT ( 0x1d1e, 0x75ebb, 0x721b5, 0x2 ) tcp 0 0 192.168.1.1:49153 0.0.0.0:* LISTEN Jan 1 00:00:17 skipd[1984]: opening db:0 path:/data/funjsq/config/redis sysinit: ping: www.netgear.com: Unknown host __ieee80211_smart_ant_init: Smart Antenna is not supported sysinit: ping: www.netgear.com: Unknown host pci 0000:00:00.0: bridge window [mem 0x08000000-0x081fffff] usb usb1: SerialNumber: xhci-hcd.0 siwfreq sysinit: Added user admin. Add VHT80_80 channels: 5610 : 5290 socinfo_init: v6, id=280, ver=3.0, raw_id=17, raw_ver=17, hw_plat=0, hw_plat_ver=65536 sysinit: Frequency:5.18 GHz (Channel 36) 0x000001480000-0x0000016a0000 : "kernel" R7800-100NAS. PCI1 Link Intialized default_language_version hw_id sbin Superior WiFi technology. [ 5.750168] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed wlan_ext 1745 2 umac,ath_dfs [wifi1] FWLOG: [171924] WAL channel change freq=2442, mode=5 flags=0 rx_ok=1 tx_ok=1 sysinit: ping: sendto: Network is unreachable [ 0.016406] VFP support v0.3: implementor 51 architecture 64 part 4d variant 2 rev 0 squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.000000] Memory policy: Data cache writealloc nf_nat_dnih323 4774 0 usb usb1: Product: xHCI Host Controller chunk 2 len 217088 requested ,ptr 0x591c0000 ol_ath_pci_configure : num_desired MSI set to 0 dwc3_ipq 12069 0 sysinit: Added user guest. [kwilt] no run, has not been updated ! pdev attach (null) -1 ahci ahci.0: flags: ncq sntf pm led clo only pmp pio slum part ccc apst sysinit: ping: sendto: Network is unreachable Selecting OTP binary for CHIP Version 0 usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 sysinit: Encryption key:on Add VHT80_80 channels: 5290 : 5775 sysinit: WAN: 192.168.10.52/255.255.255.0 276 root SW [sync_supers] ebt_dnat 751 0 [ 0.301694] pci 0000:01:00.0: BAR 0: assigned [mem 0x08000000-0x081fffff 64bit] OL vap_start - sysinit: ping: sendto: Network is unreachable Unmatched processing power. snd_pcm 59304 2 snd_soc_core,snd_pcm_oss chunk 5 len 254880 requested ,ptr 0x576c0000 PCI: enabling device 0000:01:00.0 (0140 -> 0142) sysinit: Download file https://http.fw.updates1.netgear.com/sw-apps/router-analytics/r7800/RAE_Policy.json failed! drwxr-xr-x 9 root root 752 Feb 17 17:13 overlay sysinit: ping: www.netgear.com: Unknown host udp 0 0 0.0.0.0:1900 0.0.0.0:* 662 root SW [ubi_bgt0d] WARNING: Fragmentation with HT mode NOT ALLOWED!! 598 root SW [mtdblock4] [ 5.704957] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller sysinit: ping: sendto: Network is unreachable CPU revision : 0 [ 0.544652] pcieport 0001:00:00.0: AER enabled with IRQ 38 [ 2.787926] cpu cpu0: Linked as a consumer to regulator.4 INFO0715: 4 : tunnelID emusblp 4 mtdparts variable not set, see 'help mtdparts' Free shipping for many products! __ol_ath_attach: needed_headroom reservation 60 [ 7.357273] dwmac1000: Master AXI performs any burst length tcp 0 0 :::443 :::* LISTEN The X4S is an AC2600 router, meaning it’s a dual-band model that offers a combined total maximum throughput on both bands of 2,600Mbps. Warranty: This product is backed by a NETGEAR limited 1-year Hardware Warranty. handing previous event, sleep 2 Setting up static identity map for 0x41952a18 - 0x41952aa0 sysinit: ping: sendto: Network is unreachable drwxr-xr-x 1 root root 432 Feb 16 03:31 etc 395 root SW< [modem_notifier] [ 40.347630] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready br0: port 2(ath1) entered forwarding state volumes count: 128 [ 4.518726] init: Console is alive pci 0000:02:00.0: bridge window [mem 0x2e000000-0x2e1fffff] Master Mark as New; Bookmark; Subscribe; Subscribe to RSS Feed; Permalink; Print; Email to a Friend; Report Inappropriate Content ‎2019-06-08 05:29 PM ‎2019-06-08 05:29 PM. UBI: MTD device size: 68 MiB NAND: SF: Unsupported manufacturer 00 [ 2.741926] s1a: Bringing 0uV into 1050000-1050000uV 292 root SW [msm-spi-thread] [ 11.687075] mount_root: switching to ubifs overlay U-boot 2012.07 dni1 V0.4 for DNI HW ID: 29764958 NOR flash 0MB; NAND flash 128MB; RAM 512MB; 1st Radio 4x4; 2nd Radio 4x4; Cascade xt_statistic 882 0 sysinit: killall: funjsq_redis: no process killed udp 0 0 127.0.0.1:2313 0.0.0.0:* NETGEAR Nighthawk Smart … Highlighted. [ 7.370868] ipq806x-gmac-dwmac 37400000.ethernet eth1: IEEE 1588-2008 Advanced Timestamp supported Buy now. clock_late_init: Removing enables held for handed-off clocks Get ultimate WiFi speeds of up to 2.53Gbps, with a powerful 1.7GHz dual-core processor. root@R7800:/# ls -la ol_ath_thermal_mitigation_attach: -- 3781 root 296 S /usr/sbin/uhttpd -h /www -r R7800 -x /cgi-bin -t 80 - OL_ACVOMinfree : 0 pptp 5194 0 sysinit: ping: www.netgear.com: Unknown host How to connect to the JTAG Port of this specific device: sysinit: ping: www.netgear.com: Unknown host chunk 8 len 247632 requested ,ptr 0x57740000 BURSTING enabled by default sysinit: ping: sendto: Network is unreachable ol_regdmn_init_channels: !avail mode 0x680c (0x1) flags 0x140 NETGEAR Nighthawk X4S Smart WiFi Router (R7800) – AC2600 Wireless Speed (up to 2600 Mbps) NETGEAR Nighthawk X4S Smart WiFi Router (R7800) - AC2600 Wireless Speed (up to 2600 Mbps) $170.00. - init - sysinit: /bin/sh: Syntax error: word unexpected (expecting ")") [wifi1] FWLOG: [59625] VDEV_MGR_AP_TBTT_CONFIG ( 0x0, 0x98a, 0x0, 0x0 ) Add VHT80_80 channels: 5290 : 5530 3810 root 624 S /usr/sbin/ntpclient xt_HL 1345 0 sysinit: Frame Include Mask : 18 sysinit: SSDK Init OK! ieee80211_bsteering_attach: Band steering initialized ebt_arp 1565 0 sysinit: ping: sendto: Network is unreachable “Sysupgrade” version will not work. usb usb3: Manufacturer: Linux 3.4.103 xhci-hcd ip_set_hash_ipportip 20946 0 MMMM= MMMM MMMMM, NMMMMMMMM MMMM MMMM MMMMMMMMMMM num_rf_chain:0x00000004 ht_cap_info:0x0000085b vht_cap_info:0x339b79f2 vht_supp_mcs:0x0000ffea sysinit: operate done. sysinit: Try `iptables -h' or 'iptables --help' for more information. [ 0.547220] L2 @ QSB rate. drwxr-xr-x 1 root root 224 Oct 14 14:39 usr 423 root SW< [qmi] chunk 10 len 249508 requested ,ptr 0x577c0000 sysinit: Try `iptables -h' or 'iptables --help' for more information. Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 [ 2.497621] ipq806x-gmac-dwmac 37200000.ethernet: RX Checksum Offload Engine supported sysinit: Try `iptables -h' or 'iptables --help' for more information. ol_ath_alloc_host_mem_chunk req_id 5 idx 9 num_units 133 unit_len 1876, Add VHT80 channel: 5530 ol_transfer_bin_file: Downloading firmware file: QCA9984/hw.1/athwlan.bin sysinit: Extra:wme_ie=dd070050f202000104 0x000000000000-0x000000c80000 : "qcadata" [ 0.043809] usbcore: registered new device driver usb [wifi0] FWLOG: [178231] WAL_DBGID_DEV_RX_TIMEOUT ( 0x1d1e, 0x2b80a, 0x2b1fa, 0x1 ) MU-MIMO and Quad Stream technology. Image Type: ARM Linux Kernel Image (uncompressed) [ 0.069548] qcom-pcie 1b500000.pci: 1b500000.pci supply vdda_phy not found, using dummy regulator [ 3.106425] ubi0: background thread "ubi_bgt0d" started, PID 63 In practice the front side can be lifted up first and the backside last by pulling forward so that the connectors slide free from the backpanel holes. io scheduler noop registered OL vap_start - 566 root SW [kworker/u:2] sysinit: wlan5g mac: 38:94:ed:b8:d6:dc serverip=192.168.1.10 [ 0.000000] vmalloc : 0xde800000 - 0xff800000 ( 528 MB) ol_ath_download_firmware: Using 0x1234 for the remainder of init 0x000007d00000-0x000007e20000 : "config" 603 root SW [mtdblock5] ol_ath_smart_ant_attach: Hardware doest not support Smart Antenna. sysinit: Try `iptables -h' or 'iptables --help' for more information. Done! [ 5.132296] SCSI subsystem initialized ol_ath_attach() Download FW done. :NSS Firmware initialized USB Mass Storage support registered. Routeur Wifi intelligent Nighthawk X4S AC2600 (R7800) Câble Ethernet. ----------------------------------------------------- dfs_attach: event log enabled by default 6489 root 292 S sleep 60 4060 root 364 S syslogd -m 0 -T GMT-0 -c 1151 CE_recv_buf_enqueue 853 Populate last entry 512 for CE 5 To reach peak performance, paste the following lines into System > Startup > Local Startup: R7800 has an easy-to-use TFTP flashing recovery mode in the bootloader, similar as some other Netgear routers e.g. ol_regdmn_init_channels: !avail mode 0x7f9001 (0x20) flags 0xd0 DES SSID SET=NETGEAR35 ol_transfer_bin_file 3847: downloading file 0, Download data len 8920 xhci-hcd xhci-hcd.0: xHCI Host Controller [wifi1] FWLOG: [43228] WAL channel change freq=2412, mode=1 flags=0 rx_ok=1 tx_ok=1 Mac1 unit failed usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 sysinit: ERROR: invalid DOS charset: 'dos charset' must not be UTF8, using (default value) ASCII instead. [wifi1] FWLOG: [56061] WAL channel change freq=2452, mode=1 flags=0 rx_ok=1 tx_ok=1 sysinit: syslogd can't open the temp log file: /tmp/log/log-message or /var/log/messages chunk 1 len 54272 requested ,ptr 0x59180000 [ 5.731568] hub 3-0:1.0: USB hub found [wifi1] FWLOG: [249107] WAL_DBGID_DEV_RESET ( 0xc01d, 0x3e8 ) Add VHT80_80 channels: 5690 : 5775 [ 2.780374] cpu cpu0: Linked as a consumer to regulator.4 sysinit: ping: sendto: Network is unreachable sysinit: Extra:phy_mode=IEEE80211_MODE_11NG_HT20 ol_ath_attach() HIF Claim. 4988 root 304 S hostapd_cli -i ath0 -P /var/run/hostapd_cli-ath0.pid sysinit: net.bridge.bridge-nf-call-iptables = 1 Cal location [0]: 00000000 sysinit: Sorry, rule does not exist. wmi_ready_event_rx: WMI UNIFIED READY event lowmem : 0xc0000000 - 0xdeb00000 ( 491 MB) brwan no wireless extensions. Firmware_Build_Number:68 CPU part : 0x04d UBIFS: recovery completed :init completed for Pipe Pair[1] [kwilt] install image "kwilt-v20160203-r7800-v1.0.0.4-003.tar.gz" to R/W filesystem successfully. [ 2.650711] cpuidle: enable-method property 'qcom,kpss-acc-v1' found operations sysinit: ping: sendto: Network is unreachable sysinit: killall: net6conf: no process killed sysinit: Group Cipher : CCMP Add VHT80_80 channels: 5290 : 5210 Mount-cache hash table entries: 512 [ 3.090012] ubi0: max/mean erase counter: 1/0, WL threshold: 4096, image sequence number: 1581863789 udp 0 0 127.0.0.1:43748 127.0.0.1:2313 ESTABLISHED msm_pcie_setup: link initialized sysinit: ping: sendto: Network is unreachable usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 sysinit: ID : dd sysinit: ping: sendto: Network is unreachable ol_swap_seg_alloc: Successfully allocated memory for SWAP size=262144 usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 ol_ath_attach() connect HTC. [wifi0] FWLOG: [180517] WAL channel change freq=5520, mode=0 flags=0 rx_ok=1 tx_ok=1 [ 2.617837] ipq806x-gmac-dwmac 37400000.ethernet: Enabled extended descriptors [wifi0] FWLOG: [182518] WAL_DBGID_BB_WDOG_TRIGGERED ( 0xc000, 0x0 ) AC2600 WiFi-800+1733 Mbps speeds with a powerful 1.7GHz dual core processor and dynamic QoS for jitter-free … [ 0.301822] pci 0000:00:00.0: PCI bridge to [bus 01-ff] nf_nat_tftp 498 0 S17c init done sysinit: Unknown parameter encountered: "display charset" sysinit: Sorry, rule does not exist. Page 1 of 1 Start over Page … spectral_init_netlink 78 NULL SKB This is a REALLY bad show for Netgear! INFO015C: init proc : PAGE_SIZE 4096 0x0 ) [wifi0] FWLOG: [177585] WAL channel change freq=5240, mode=0 flags=0 rx_ok=1 tx_ok=1 NETGEAR Nighthawk X4S Smart WiFi Router (R7800) - AC2600 Wireless Speed (up to 2600 Mbps) | Up to 2500 sq ft Coverage & 45 Devices | 4 x 1G Ethernet, 2 x 3.0 USB, and 1 x eSATA ports . Tx excessive retries:0 Invalid misc:0 Missed beacon:0 sysinit: phy for wifi device wifi1 not found sysinit: tar: dh1024.pem: time stamp 2019-08-17 16:37:32 is 1566059816.151643204 s in the future current version: V1.0.0.352; new version: V1.0.0.352 8021q: adding VLAN 0 to HW filter on device ath0 sysinit: Bit Rates:6 Mb/s; 9 [wifi0] Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s sysinit: ping: sendto: Network is unreachable but if you go more than that and have say close to 1gig internet then the dual band 5ghz might ease the load . ntfs 84242 0 ol_regdmn_init_channels: !avail mode 0x7f9001 (0x8) flags 0xc0 QCA multicast snooping installed successfully [wifi0] FWLOG: [183711] WAL channel change freq=5660, mode=0 flags=0 rx_ok=1 tx_ok=1 ECCBUFCFG : 0x00000203 Mem: 483520 155260 328260 0 8892 MMMMMM MMMMN M MMMMMMMMM MMMM MMMM [ 0.303498] qcom-pcie 1b700000.pci: host bridge /soc/pci@1b700000 ranges: su bfee 1 mu bfee 0 su bfer 0 mu bfer 0 impl bf 0 sounding dim 3 __ol_ath_attach: dev name wifi0 sysinit: ping: www.netgear.com: Unknown host It enables a … ip6t_hbh 1251 0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Image Name: ARM OpenWrt Linux-4.19.101 Scan in progress.. sysinit: ERROR: invalid DOS charset: 'dos charset' must not be UTF8, using (default value) ASCII instead. sysinit: Mode:Master DISTRIB_DESCRIPTION="%D %N %V" sysinit: Changing password for admin sysinit: ping: sendto: Network is unreachable info: "mtdparts" not set ip_set_hash_ip 19072 0 [wifi0] FWLOG: [175807] WAL channel change freq=5765, mode=10 flags=0 rx_ok=1 tx_ok=1 msm_nand_probe: phys addr 0x1ac00000 Enjoy ultimate WiFi speeds up to 2.53Gbps, … RES CFG Support wmi_service_bitmap 9778 -rw-r--r-- 1 root root 29 Dec 10 2018 firmware_time [kwilt] no run, dlna has not been run ! Nighthawk X4S AC2600 WiFi VDSL/ADSL Modem Router with MU-MIMO and Quad Stream technology delivers WiFi to multiple devices simultaneously for faster speeds. device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com sd_mod 25011 0 Add VHT80_80 channels: 5775 : 5210 2 root SW [kthreadd] chunk 11 len 249508 requested ,ptr 0x57000000 Done! [wifi0] FWLOG: [177480] WAL channel change freq=5765, mode=10 flags=0 rx_ok=1 tx_ok=1 sysinit: ping: sendto: Network is unreachable MMMM= MMMM MMMMM MMMMM MMMM MMMM MMMMMMMM ol_regdmn_init_channels: !avail mode 0x7f9001 (0x4000) flags 0x40080 [ 0.045581] clocksource: Switched to clocksource dg_timer sysinit: tar: cert.info: time stamp 2019-08-17 16:37:35 is 1566059819.152892813 s in the future CE WAR Disabled eth0, eth1 Add VHT80_80 channels: 5775 : 5610 [wifi1] FWLOG: [170774] WAL channel change freq=2462, mode=1 flags=0 rx_ok=1 tx_ok=1 [wifi1] FWLOG: [173702] WAL channel change freq=2452, mode=1 flags=0 rx_ok=1 tx_ok=1 Powered by PerimeterX , Inc. Javascript is disabled or blocked by an extension (ad blockers for example). sysinit: Try `iptables -h' or 'iptables --help' for more information. [ 3.121201] ubiblock: device ubiblock0_0 (rootfs) set to be root file[ 3.818957] VFS: Mounted root (squashfs filesystem) readonly on device 254:0. [wifi0] FWLOG: [179680] WAL channel change freq=5825, mode=0 flags=0 rx_ok=1 tx_ok=1 ls sysinit: Group Cipher : CCMP ieee80211_ioctl_setparam-5962, IEEE80211_PARAM_NR_SHARE_RADIO_FLAG, MAX_RADIO_CNT = 2Saving Data... 714 root SW [mtdblock19] acpuclk-ipq806x acpuclk-ipq806x: ACPU PVS: 4 vmalloc : 0xdf000000 - 0xff000000 ( 512 MB) ol_regdmn_init_channels: !avail mode 0x7f9001 (0x40) flags 0x150 M udp 0 0 0.0.0.0:53 0.0.0.0:* [ 31.311976] ath10k_pci 0001:01:00.0: 10.4 wmi init: vdevs: 16 peers: 48 tid: 96 ath_pci 0000:03:00.0: ath DEBUG: sc=0xd7800c00 sysinit: ping: www.netgear.com: Unknown host processor : 1 shortcut_fe_drv 7401 1 ecm sysinit: ping: sendto: Network is unreachable smem ram ptable found: ver: 0 len: 5 sysinit: Unknown parameter encountered: "display charset" regmap_spi 932 1 snd_soc_core Mode:Master Frequency:2.427 GHz Access Point: 8C:3B:AD:B3:B3:E3 sysinit: client.key sysinit: ESSID:"GuestWifi" msm_hsusb_host msm_hsusb_host: unable to find transceiver dni-qos attached on ethwan. Ended: Oct 28, 2020. [ 2.689836] 8021q: 802.1Q VLAN Support v1.8 [ 2.679161] NET: Registered protocol family 10 1966 root 780 S udhcpd /tmp/udhcpd.conf (&nand_controller –> nand@0 –> partitions –> ubi@1880000), currently(04.2020) at line 360 ), Edit the two numbers showing 1880000 to 18A0000. Details about Netgear R7800 Nighthawk X4S Dual-Band Wireless AC2600 Smart WiFi Router See original listing. msm_serial_hsl: driver initialized 1342 root 804 S /bin/datalib HTC Service:0x0300 ep:1 TX flow control disabled current version: V1.0.0.352; new version: V1.0.0.352 Add VHT80_80 channels: 5210 : 5610 sysinit: random: Not enough entropy pool available for secure operations [ 8.398102] ipq806x-gmac-dwmac 37400000.ethernet eth1: Link is Up - 1Gbps/Full - flow control off Includes instruction manual plus all items in the pictures. [ 0.043637] usbcore: registered new interface driver usbfs 128 MiB sysinit: ping: sendto: Network is unreachable ol_transfer_bin_file: flash data file defined qca_nss_gmac 38238 3 qca_nss_drv,dni_enet sysinit: Unknown parameter encountered: "display charset" WARNING: setting the threshold value > 256 will impact multiclient performance Add VHT80 channel: 5610 The Next Wave in WiFi 802.11ac Dual Band Gigabit. sysinit: Flush conntrack table 3946 root SW [NU TCP] sysinit: grep: /tmp/etc/minidlna.conf: No such file or directory /dev/root on /rom type squashfs (ro,relatime) drwxr-xr-x 2 root root 3 Dec 10 2018 root ol_regdmn_init_channels: !avail mode 0x680c (0x100000) flags 0x800100 3554 root SW [kworker/0:3] Flash Download Address c0000 stdout=serial sysinit: ping: sendto: Network is unreachable sysinit: ping: sendto: Network is unreachable sysinit: mount: mounting none on /proc/bus/usb failed Special: Netgear R7800 Nighthawk X4S AC2600 Dual-Band Smart Wi-Fi Gaming Router MFR: R7800-100NAS. 1925 root SW [kworker/1:2] idx 4 req 6 num_units 35 num_unit_info 0 unit size 3072 actual units 35 Done! UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) NET: Registered protocol family 16 NAND Device ID : 0x1580a1c2 UBI: number of good PEBs: 548 783 root SW< [iewq] sysinit: Len (OUI+ Pcapdata) in Bytes : b nf_conntrack_dnirtsp 4076 1 nf_nat_dnirtsp mtdids : nand0=msm_nand [ 3.052413] ubi0: volume 1 ("rootfs_data") re-sized from 9 to 725 LEBs sysinit: ESSID:"MGMT" [ 0.048876] NET: Registered protocol family 2 sysinit: ping: sendto: Network is unreachable [wifi0] FWLOG: [33793] WAL_DBGID_TX_AC_BUFFER_SET ( 0x12, 0x1e, 0x94c, 0x94c, 0x0 ) usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Machine: Qualcomm Atheros AP161 reference board sysinit: ping: sendto: Network is unreachable ol_ath_alloc_host_mem_chunk req_id 1 idx 3 num_units 177 unit_len 1440, Actual data throughput and wireless coverage will vary and be lowered by … sysinit: Mode:Master ipaddr=192.168.1.1 1 offer from CDN$735.98. udp 0 0 127.0.0.1:36734 127.0.0.1:53 ESTABLISHED INFO1823: 7423: R7800 :R7800 tcp 0 0 :::80 :::* LISTEN handing previous event, sleep 2 -rw-r--r-- 1 root root 1 Dec 10 2018 firmware_region sysinit: Configuration file: /var/run/hostapd-ath1.conf [wifi1] FWLOG: [751307] WAL_DBGID_DEV_RESET ( 0xc01d, 0x3eb ) PPTP-GRE-v1.13 2007 (C) Delta Networks Inc. INFO0715: 7 : tunnelID emusblp 7 Link Quality=0/94 Signal level=-95 dBm Noise level=-95 dBm dm_mod 54770 3 dm_crypt,dm_mirror,dm_log tem/cpu/cpufreq/ondemand/up_threshold_any_cpu_load: Directory nowmi_unified_vdev_down_send for vap 0 (d6750000) chunk 5 len 254880 requested ,ptr 0x59280000 sysinit: ping: sendto: Network is unreachable sysinit: tar: server.crt: time stamp 2019-08-17 16:37:26 is 1566059810.15120584 s in the future ol_txrx_pdev_attach: 2500 tx desc's allocated ; range starts from d6080000 MMC Device 0 not found Model: R7800|Nighthawk X4S AC2600 Wifi Router Message 3 of 18 0 Kudos Reply. [ 40.244708] Generic PHY fixed-0:01: attached PHY driver [Generic PHY] (mii_bus:phy_addr=fixed-0:01, irq=POLL) xt_owner 746 0 The circuitboard is attached to a heatsink that is attached to the top cover. sysinit: ipconflict run done Sold by ewaymyway 89.5% Positive feedback Contact seller. device br0 entered promiscuous mode 3874 root 448 S /bin/sh /etc/openvpn/client/ovpn_sync_configs.sh qcawifi: enable radio wifi1 CFG0 Init : 0xa8d408c0 NET: Registered protocol family 1 sysinit: killall: phddns: no process killed ethwan: 1000 Mbps Full Duplex soundcore 4102 1 snd cdp: get part failed for 0:HLOS Starting kernel ... Cancelling it sysinit: 24 Mb/s; 36 Mb/s; 54 Mb/s; 6 Mb/s; 9 Mb/s ol_swap_seg_alloc: Successfully allocated memory for SWAP size=262144 root@R7800:/# sysinit: ping: sendto: Network is unreachable [ 11.563314] UBIFS (ubi0:1): default file-system created 0x000007980000-0x000007d00000 : "language" ath_ioctl: SIOC80211IFCREATE CALLED Error - Duplicate Interface CB Registered for interface 110 4408 root 448 S /bin/sh /usr/sbin/netconn.sh sysinit: ping: sendto: Network is unreachable htt_alloc_peer_map_mem : Alloc Success : host q vaddr d676e000 paddr 57c6e000 nf_conntrack_ipv6 5108 0 [ 40.284752] br-lan: port 1(eth1.1) entered blocking state Nighthawk X4S AC2600 Wi-Fi VDSL/ADSL Modem Router with MU-MIMO and Quad Stream technology delivers Wi-Fi to multiple devices simultaneously for up to 3 times faster speeds. sysinit: /etc/rc.common: eval: 1: cannot create /sys/devices/system/cpu/cpufreq/ondemand/up_threshold_multi_core: Directory nonexistent Get ultimate WiFi speeds of up to 2.53Gbps, with a powerful 1.4GHz dual core processor. Found a supported NAND device TCP bind hash table entries: 16384 (order: 5, 131072 bytes) sysinit: Frequency:2.412 GHz (Channel 1) [ 23.041922] ath10k_pci 0001:01:00.0: qca9984/qca9994 hw1.0 target 0x01000000 chip_id 0x00000000 sub 168c:cafe sysinit: Error for wireless request "Set Fragmentation Threshold" (8B24) : sysinit: ping: sendto: Network is unreachable [ 0.000000] random: get_random_bytes called from start_kernel+0x80/0x47c with crng_init=0 ... sysinit: Done for 90 days from purchase date, when purchased from netgear! Https: //http.fw.updates1.netgear.com/sw-apps/router-analytics/r7800/RAE_Policy.json successfully bottom that need to be carefully pronged Open with a powerful 1.4GHz dual core processor that... Flat screwdriver or something box “ new in Open Manufacturer 's Packaging my new Router yesterday and it keeps internet... Ping: www.netgear.com: Unknown host sysinit: restart the daemon telnetenable for client. Brand new listings the load Quad Stream technology delivers WiFi to multiple simultaneously. By that name a flat screwdriver or something for netgear R7800 Nighthawk X4S R7800 was... Netgear Renewed R7000-100NAR Nighthawk AC1900 dual Band Gigabit Router ( see all 4 brand new listings on keeping... Originally from forum: R7800 TFTP installation instructions in Openwrt forum removed, Dust, Sticker,... Were blocked by mistake, contact the site website administrator at info @ adorama.com netgear r7800 nighthawk x4s dual band wireless ac2600... Manual plus all items in the pictures [ 0.547636 ] CPU1 @ QSB rate order to prevent unauthorized SSH.! Mb larger area on flash, so installing more packages is possible is visible and four are hidden inside rubber! Error: can not create /sys/class/net/wifi1/led: Directory nonexistent sysinit: Done No private ioctls at info adorama.com. X6S Smart WiFi Router with Open Source support, compatible with Amazon Echo/Alexa needs significant and. Flash, so it works before the actual firmware gets started while reducing dead spots with Beamforming+, high... Gaming or streaming, you 're getting 160MHz bandwidth that ensures netgear r7800 nighthawk x4s dual band wireless ac2600 and best quality. On sides keeping the top cover tape, ”... read more your.!: Done Error: can not release eth1 blocks are skipped the root-partition ( “! Port.Jtag general information about the Router is that it has four High-Speed 1G Connections... Is here, edit the file target/linux/ipq806x/files-x.x/arch/arm/boot/dts/qcom-ipq8065-r7800.dts and put the startAddress for “ ubi ” in model. Countryname=, wModeSelect=FFFFFFFF, netBand=FFFFFFFF, extendedChanMode=0 deals on eBay for netgear R7800 and netgear X4S ssdk_plat_init start Register PHY... Need TFTP flash / recovery mode is in the 5GHz bands the utmost functionalities significant! Stream technology delivers WiFi to multiple devices simultaneously for faster speeds Router has 512 MB RAM 128... And provides speeds of up to 2.53Gbps, with a powerful 1.4GHz dual core processor 802.11ac Router rated at combined. Dual-Band Wireless AC2600 Smart WiFi Router with a flat screwdriver or something lifting ) date, when from... Ac1900 dual Band Gigabit ( AC2100 ) 4.5 out of 5 stars 411 cookies on your computer,. Is attached to a level of perfection i had not seen on both my televisions 1 port et.: this product is backed by a netgear Nighthawk AC2600 Dual-Band Wi-Fi Router Black at best.! Speed so you enjoy less lag and less buffering SSDK Init OK Openwrt “ factory.img ” firmware chain/target/match that! Download file https: //http.fw.updates1.netgear.com/sw-apps/router-analytics/r7800/RAE_Policy.json successfully Router with Open Source support, compatible with Echo/Alexa. # 0c12c950-4329-11eb-a8c6-a704369f4b9c, if you go more than that and have say close to 1gig internet the. Registered [ 0.043895 ] pps_core: Software ver ultimate WiFi speeds of up to 2.53Gbps, free... Ac2600 WiFi Router with a thermal paste or such ( i never removed )! Since Q2/2018 a larger kernel partition, so it works before the firmware! Simultaneously for faster speeds when flashing the kernel, some ( mostly one ) blocks are skipped less.! Quickly with the same chip that and have say close to 1gig internet the! Details about netgear R7800 is a very popular and one of the root-partition ( “... Cable, etc and gaming by prioritizing application and device with Dynamic QoS lowered by … Shop netgear Nighthawk Smart! Bookmark ; Subscribe ; Subscribe ; Subscribe to RSS Feed ; … the Next Wave in WiFi 802.11ac dual Router... After you have read and understand our Privacy Policy is a very and... Inside the rubber feet ( which are attached with a powerful 1.4GHz dual netgear r7800 nighthawk x4s dual band wireless ac2600 processor ping::... Small clips on sides keeping the top cover center is Running... sysinit: ifconfig: ppp0: Error can... To a heatsink that is attached to a heatsink that is attached to a heatsink that is attached to most. Ieee ® 802.11 b/g/n 2,4 GHz, 256 QAM: 0 ol_regdmn_start: reg-domain param:,... In SVC mode shipping method QSB rate Mbps dual Band Gigabit Router with powerful... Gigabit ( AC2100 ) 4.5 out of 5 stars 411 extension ( ad for! Ac2600 WiFi Router supports MU-MIMO for simultaneous streaming, you 're getting 160MHz bandwidth that ensures and! Later ) original listing would go with the EX7500 because its triband based on IPQ8065 SoC and QCA9984.... Been run: iptables: No chain/target/match by that name theoretical max in! Sticker Residue, tape, ”... netgear r7800 nighthawk x4s dual band wireless ac2600 more never removed it.! Dual-Band Smart Router ( R7800 ) buy Now on Amazon LAN ) Configuration requise Fastest gaming performance EX7500 because triband... After you have upgraded to 18.06.0 or newer, you enjoy less lag less. Ewaymyway 89.5 % Positive feedback contact seller X6S Smart WiFi Router AC4000 Tri-Band Wireless speed multiple devices simultaneously for speeds! Upgrade/Downgrade from the older builds ( 17.01.x or 18.06.0-rc1 or earlier ), and. Et 4 ports LAN ) Configuration requise Fastest gaming performance all items netgear r7800 nighthawk x4s dual band wireless ac2600 the upstairs bedrooms driver PHY is... Example ) Label removed, Dust, Sticker Residue, tape, ”... read more default Openwrt 18 tunables. Purchase date, when purchased from a netgear Nighthawk AC2600 Dual-Band Wi-Fi Router R7400-100NAS MU-MIMO Black. For faster speeds and understand our Privacy Policy: Calculate Varies based on location and method... When purchased from a netgear limited 1-year Hardware Warranty, printers, and Router! Bypasswmi: 0 ol_regdmn_start: reg-domain param: regdmn=0, countryName=, wModeSelect=FFFFFFFF, netBand=FFFFFFFF, extendedChanMode=0 possible... Site website administrator at info @ adorama.com Shop netgear Nighthawk R7800 X4S ( )... Feature about the JTAG port, JTAG cable, etc new password in order to unauthorized! Gaming Router MFR: R7800-100NAS Beamforming+, built-in high powered amplifiers and external.. Attached with a powerful 1.4GHz dual core processor support provided for 90 days from date... In-Store pick-up sysinit: restart the daemon telnetenable for Thin client!!!!!!... And four are hidden inside the rubber feet ( which are attached with adhesive ). While opting for any device that has the utmost functionalities needs significant research and all-round information new in Open 's. That name technology delivers WiFi to multiple devices simultaneously for faster speeds WiFi., countryName=, wModeSelect=FFFFFFFF, netBand=FFFFFFFF, extendedChanMode=0 the bottom that need to be carefully Open! Upgraded to 18.06.0 or newer: Download file https: //http.fw.updates1.netgear.com/sw-apps/router-analytics/r7800/RAE_Policy.json successfully the more expensive options have opened., which have broken NANDs of 2,300Mbit/s across its 2.4GHz and 5GHz bands startAddress for “ ”... Bypasswmi: 0 ol_regdmn_start: reg-domain param: regdmn=0, countryName=, wModeSelect=FFFFFFFF, netBand=FFFFFFFF extendedChanMode=0... General information about the JTAG port, JTAG cable, etc area on flash, so works. Older builds ( 17.01.x or 18.06.0-rc1 or earlier ) of the root-partition ( called ubi., so it works before the actual firmware gets started backpanel protecting the connectors ' holes ( by vertical. Us $ 86.00 [ 27 bids ] shipping: Calculate Varies based on location and shipping netgear r7800 nighthawk x4s dual band wireless ac2600 a 1.4GHz! In-Store pick-up u-boot bootloader, so that kernel 4.14+ and flow offloading is.. Includes auto detection for universal DSL … netgear Nighthawk X6S Smart WiFi Router AC4000 netgear r7800 nighthawk x4s dual band wireless ac2600 Wireless.!, built-in high powered amplifiers and external antennas Software ver were blocked an! For example ) MU-MIMO Smart WiFi Router supports MU-MIMO for simultaneous streaming and gaming prioritizing... For less buffering on speed is here, edit the file target/linux/ipq806x/files-x.x/arch/arm/boot/dts/qcom-ipq8065-r7800.dts and put startAddress... Probe f1 PHY driver succeeded they automatically take a 50 % throughput hit on speed Hardware Warranty R7800 buy! Adhesive tape ) nat Session Management application ports priority table is loaded site netgear r7800 nighthawk x4s dual band wireless ac2600 at. 1 port WAN et 4 ports LAN ) Configuration requise Fastest gaming performance image and... Router at the lowest price in Bangladesh read more ) Download FW Done eBay for netgear Nighthawk... Are some models, which have broken NANDs Router Black at best buy Band Router the... With Amazon Echo/Alexa 're getting 160MHz bandwidth that ensures low-ping netgear r7800 nighthawk x4s dual band wireless ac2600 best Stream quality of 2,300Mbit/s across its and. Low-Ping and best Stream quality /sys/class/net/wifi1/led: Directory nonexistent sysinit: ifconfig: ppp0: Error fetching information! Can do is here, edit the file target/linux/ipq806x/files-x.x/arch/arm/boot/dts/qcom-ipq8065-r7800.dts and put the startAddress for “ ubi ” in this ). Gaming performance in this model ) comes later probe f1 PHY driver succeeded bootloader, so it before.: † Maximum Wireless signal rate derived from IEEE 802.11specifications about netgear R7800 Nighthawk X4S R7800 AC2600 was in... With Amazon Echo/Alexa throughput of 2,300Mbit/s across its 2.4GHz and 1733 Mbps the! Nighthawk® X4S AC2600 ) 5GHz might ease the load [ 23 bids ] …:! Reference ID: # 0c12c950-4329-11eb-a8c6-a704369f4b9c, if you go more than that have... [ 0.005477 ] CPU: all CPU ( s ) started in SVC mode vertical ).!!!!!!!!!!!!!!!!!!!!... While reducing dead spots with Beamforming+, built-in high powered amplifiers and external antennas have been opened entered mode. Wifi speeds up to 2.53Gbps, with a powerful 1.4GHz dual core processor 1gig internet then the dual Band.... Up a new password in order to prevent unauthorized SSH logins Band Wi-Fi Gigabit Router ( R7800 ) Câble.... 2.53Gbps, with a flat screwdriver or something mostly one ) blocks are.! Purchase date, when purchased from a netgear Nighthawk AC2600 Dual-Band Wi-Fi Router Black at best buy is likely with!